Home Entertainment & Automation Services in Matthews, NC.
Home Entertainment & Automation Services in Matthews, NC.
Home audio and Video Services in Matthews, NC.  TV installation, Surround Sound, Home Entertainment Systems
My House Is Built and Wired – Now What?

The owner of a new home managed to have it centrally wired before plastering, and wants to know what A/V and tech systems may lie ahead.

Q. I have just bought a new house, and before the house was plastered I got extra wiring done by the electrician. I have wiring in all rooms for speakers (ceiling in all rooms apart from sitting room where speakers will be free-standing). All wires go back to one area under the stairs except for surround sound for sitting room. I haven’t done anything else in regards to amps, systems etc. Can you advise me as to what to do from here or what systems I need, or what you recommend I do?

A. It sounds like you have a good start on a multiroom audio and home theater system. Depending on your finances there are a number of things you could do. I would develop a budget for these systems and I would write down a few key points that you want the system to do, then I would contact a professional installation company.
An installer will be able to work with you to outfit your home with the products and technologies that best fit your lifestyle applications and budget considerations.
Some of the multiroom audio solutions you’ll probably be looking at from an installer include products from companies like Russound, NuVo, Niles, Sonance and SpeakerCraft.
Your theater will also afford you many options that depend on your room size, usage scenarios and of course, your budget.
A few of the things an installer will discuss with you includes how the system will be used (movies, TV, music and whether you want the system tied into your multiroom audio system). From there he will show you some technology and product solutions such as separates (amp/preamp) vs. receivers, Blu-ray players, media servers, Apple iPod compatibility, and video options like flat-screen TVs vs. a screen and projector and even anamorphic lens solutions. Are you dedicating a room to a theater, or will it be in a multipurpose room?
The final element he’ll discuss with you is the control options for the systems and whether you want a whole-house solution or IR-based remotes for each system.
One last thing too, if you still have the ability to go into the walls think about running Ethernet (Cat 5) cabling to backbone current and future data/communication and entertainment solutions that you may want to explore. 

by Robert Archer

http://www.electronichouse.com/article/my_house_is_built_and_wired_now_what/C93

Custom Installation Services, LLC – Charlotte and Asheville NC’s Source For Multi Room A/V Sales Service & Installation!

Posted in Audio Systems, Automation, Media Rooms, Multi Room A/V, Structured Wiring, technology | Tagged , , , , , , , , , , , , , , , , , , , , | Leave a comment


Can RadioShack & Other Retailers Sell Home Automation?

Home control is still a “push” sell and CE pros are best positioned to push it into the mainstream

When I suggested in my January Industry Insider that home automation has never succeeded at retail, I received a harshly worded response from 35-year industry veteran Dave Rye.

The senior VP of X10 wrote, “Quite frankly Julie you haven’t a clue what you’re talking about.”

He went on to recount the impressive history of X10 – a pioneer in powerline-based control – and concludes, “X10 doesn’t just ‘try’ sell to the masses, we do it, and do it very successfully.”

I concede that X10 does a wonderful job of selling gadgets and covert cameras, but not home automation to the masses. I don’t mean masses of gadget freaks, but masses of ordinary people. And by home automation, I mean integrated lighting and thermostats and maybe a macro or two.

Rye rattles off a litany of X10 private-labeled solutions for the likes of IBM, RCA, RadioShack and Stanley — all of which were very capable solutions back then, but none of which succeeded. True, as he says, they were all “sold at retail, to the masses.”

Sold, perhaps, but not purchased.

We see the same phenomenon today, despite boasts from numerous home-control vendors that their products have been picked up by RadioShack, Lowes, Best Buy and other mass marketers. Picked up by retailers, but are they being picked up by consumers?

On a recent trip to my local Shack — the corner store formerly known as RadioShack — I found a very brisk cell phone kiosk. But not a single person gazed at the modest array of X10-like gadgets.

Furthermore, dust had settled on the two Schlage Link boxes in the store. Although the boxes — containing a Z-Wave-enabled door lock, wireless Internet gateway, and Z-Wave lamp module — sat on prime shelves, they attracted little interest from passersby.

I asked the store associate (a long-time employee): Have you sold many of the Schlages?

He looked at me confused.

When I pointed to the boxes, he said, “Oh those. No, people are turned off by the price. They’re like $300.”

And then I asked how customers felt about the $12.99 monthly service fee for remote access.

Again, that confused look: “What?!”

And that’s probably the same dialog I would have with the folks at Lowe’s, Best Buy or other popular stores that sell home automation.

RadioShack stock is up about 80% over the past year, and the company enjoyed a 26-percent increase in earnings in the fourth quarter. But it was all about cell phones. Phones are easy to sell. Consumers know what they are. RadioShack employees know what they are. Who has the bandwidth to learn about and sell home automation?

Not to pick on Schlage. The same can be said of Xanboo, iControl and countless other home-control vendors that have practically abandoned the retail channel. Furthermore, there has not been a single successful home-control initiative involving utilities, telcos, cable and other service providers, despite numerous efforts.

Home automation still remains a very assisted sale. Except for the geeks, the real mass market doesn’t understand the stuff, and doesn’t want to install it.

So there remains a tremendous opportunity for integrators, even if you’re installing DIY-friendly products like Schlage.

By Julie Jacobson

 http://www.cepro.com/article/can_radioshack_other_retailers_sell_home_automation/

Custom Installation Services, LLC – Charlotte and Asheville NC’s Source For Home Automation Products!

Posted in Automation, News, technology | Tagged , , , , , , , , , , , , , , , | Leave a comment


Auton Under-Bed TV Lift a Dreamy Solution

CIS - Charlotte, NC's Source For Auton Automation Solutions!

CIS - Charlotte, NC's Source For Auton Automation Solutions!

When you’re not watching TV, the Dream Machine can hide it under your bed at the press of a button.

Sometimes you just don’t have the right wall for mounting a TV. And sometimes you just want to keep the views out of your bedroom window intact, whether they’re looking out on a beach, a city skyline or mountainside.

Auton may have the designer-friendly solution for your viewing needs. Keep your vistas pristine, and keep your TV out of the way when you don’t want to watch it—the company’s Dream Machine under-bed TV lift does the manual labor for you.

We see plenty of TV hide-away solutions that stow a set within the ceiling or bed footboard. The Dream Machine utilizes today’s super-thin TVs to fold them up and tuck them under the bed (or other place you’re looking to save space).

With the press of its wireless remote, the lift will quietly raise your TV out and up from under the bed and into a favored preset viewing height. From there it’s not only viewable from the bed, but anywhere else in the room because it can swivel 180 degrees in either direction. Then it’ll fold back up and under again to its original position with another click.

The Dream Machine can hold up to 120 pounds, more than enough for today’s light-weight flat panels, and it slides on polyurethane wheels under the bed so no worries about installation hassles or floor scratching.

Check with your local Auton dealer or custom electronics pro for more.

CIS - Charlotte, NC's Source For Auton Dream Machine Bed Lift

by Arlen Schweiger

http://www.electronichouse.com/article/auton_under-bed_tv_lift_a_dreamy_solution/

Custom Installation Services, LLC – Charlotte and Asheville NC’s Source For Auton Automation Products!

Posted in Automation, Flat Panel TV's, News, technology | Tagged , , , , , , , , , , , , , , , , , , , , , | Leave a comment


Custom Installation Services, LLC | P.O. Box 132 Matthews, NC 28106 | 704-400-8701 | dmiller@cis-nc.com
Visit Our Partners: DV Wise Custom Homes | CleanX Corp

 


 

 

 

 

Website Hosting and Website Design by McBryde Web Site Design
For technical issues e-mail webmaster@mcbryde.com