Home Entertainment & Automation Services in Matthews, NC.
Home Entertainment & Automation Services in Matthews, NC.
Home audio and Video Services in Matthews, NC.  TV installation, Surround Sound, Home Entertainment Systems
What Display is Best for My Viewing Distance?

CIS - Charlotte, NC's Source for speakercraft and Marantz home theater speakers and electronics!

CIS - Charlotte, NC's Source for speakercraft and Marantz home theater speakers and electronics!

Is a plasma a good idea for Steve’s 15-20 foot viewing distance?

Q. I am looking at purchasing a Samsung PN63B590 for my living room. I’m going plasma because of the size, and my viewing distance is 15-20 feet. Is there a better option that you know of for the same price range? – Steve, Indiana

A. Steve, my suggestion, considering your viewing distance, is to go with a two-piece projection system.

I searched around and found an Epson Home Cinema 8100 1080p Projector for $1,500. I also found an Elite Screen 100-inch EZ Frame CineGrey Screen for $385. This system gives you a much bigger screen for less than $2,000.

The 100-inch CineGrey from Elite helps color saturation, black levels and contrast in rooms with ambient light. The Epson projector is a highly-rated, affordable 1080p projector that should be bright enough to fill a 100-inch screen with some ambient light.

A plasma will do certain things better than a two-piece system. But with the combination of Epson’s 1080p resolution and the gray screen, you should get a good picture from it and an even better picture when the lights are off.

One thing both plasmas and projection systems need is control of a room’s ambient light. LCD TVs are brighter and custom installers tend to use them more in a bright room. Where you’re looking at a plasma, you’ll need some control of the light.

If you buy this system, look into Lutron’s Maestro IR dimmer. It’s $40 at Home Depot, installs in a few minutes, and controls your lights, saving you just as much money as a CFL bulb.

If this system is too complex, talk to a local custom installer. He may have some basic packages that he could install for you.

 by Robert Archer

http://www.electronichouse.com/article/what_display_is_best_for_my_viewing_distance/C223

Custom Installation Services, LLC – Audio/Video Sales, Service and Installation in North Carolina and South Carolina

 

Posted in Home Theater, lighting control, Media Rooms, technology | Tagged , , , , , , , , , | Leave a comment


3D: Getting to Know the Hardware

Taking the plunge into 3D home entertainment? Here are some components you’ll need to know about.

Did everyone finish their required 3D reading? After last week’s class on 3D: Getting to Know the Basics, I hope everyone has a handle on the physics and physiology of how 3D works. Now we’re moving on to the nuts and bolts … the hardware you’ll need to to get your own 3D theater up and running in time for poison arrows, missiles, and Smurf-a-hontas to fly past your Berklines. Here are some FAQs:

1. Will I need a new display to enjoy 3D? If so, why?

To avoid a 3D format war, HDMI Licensing, LCC has released the 3D portion of the HDMI 1.4 spec for incorporation by all licensees, not just consortium members. The spec outlines “Full HD 3D” as being able to present a 1080p frame at 60Hz refresh to EACH eye. Since each eye sees its own frame, and everyone I know has two eyes, this means the combined signal will need to support 1080p at 120Hz. While many current displays are capable of refreshing at a 120Hz or higher, 120Hz INPUT signals are not supported by the current HDMI 1.3a spec. There are other more technical issues regarding LCD response time and processing power, but the 120Hz input requirement is the main consideration. Other lower resolutions outside of “Full HD 3D” may be added in the HDMI 1.4a spec, but that’s mostly speculation. 

2. My Mitsubishi DLP TV is “3D Ready.” What does this mean?

Your TV is capable of creating the 3D effect, but the method it uses is not compatible with the newly released 3D Blu-ray spec. Mitsubishi uses a checkerboard pattern frame field, while the 3D Blu-ray spec uses frame stacking.  Hope is not lost, however. At CES 2010 Mitsubishi announced a 3D Blu-ray adapter (3DC-1000) that will convert 3D Blu-ray signals to be compatible with the Mitsubishi’s 3D process. Other manufacturers who have sold “3D Ready” displays have not announced similar adapter devices. 

3. Will I need a new 3D Blu-ray player as well?

Sadly, yes. For the same reasons you’ll need a new TV (mainly the 1080p120 requirement), as well as internal 3D processing and active-shutter glasses sync, most current Blu-ray players are not 3D capable. Luckily, most CE brands have announced new 3D capable players, and the price points aren’t breaking the bank either. The main exception is the PlayStation 3, which Sony announced will receive a 3D firmware upgrade. This is possible because the PS3’s cell processor provides much more horsepower than most stand-alone BD players. If and how the PS3 will meet the 1080p120 requirement without HDMI 1.4 is yet to be seen. 

4. TV? Check. Blu-ray player? Check. What else will I be reaching into my wallet for?

Chances are, HDMI 1.3a cabling won’t have the bandwidth to carry 1080p120 signals required for “Full HD 3D”. Also, HDMI 1.3a switching AVRs won’t be able to pass through the 3D signal, so they’ll either need to be bypassed with a direct video connection or replaced. Sony and Pioneer have both announced 3D-capable AVRs, and other AVR manufacturers will surely follow suit. Did everyone bring your calculators? This is all adding up quick.

Now that everyone has a good case of 3D sticker shock going, let’s dismiss and head over to Caribou Coffee to perk back up. Next week we’ll pick up with some discussion of the what, where, and why of 3D content. Class dismissed. 

by Stephen Hopkins

http://www.electronichouse.com/article/3d_getting_to_know_the_hardware/

 Custom Installation Services, LLC – Audio/Video Sales, Service and Installation in North Carolina and South Carolina

Posted in Blu-ray, Music and Movies, News | Tagged , , , , , , , , , , , , , , | Leave a comment


4 Tech Gifts for Valentine’s Day
 

 

 

 

 

C.I.S. - Your Media Room Experts in Charlotte, NC!

C.I.S. - Your Media Room Experts in Charlotte, NC!

Set the stage for a romantic evening at home with the addition of a few electronic products like dimmers and a wireless music system.

 

 Forget the dinner at a fancy restaurant, a bouquet of flowers and a box of chocolates.

They’ve been staple gifts for Valentine’s Day for way too long.

It’s time to shake things up.

With a few simple electronics additions, you can turn your own home into a romantic hideaway with some mood lighting, music and more. Plus you can use them and stay in on birthdays, too.

Click here for 4 Tech Gifts for Valentine’s Day.

by Lisa Montgomery

http://www.electronichouse.com/article/4_tech_picks_for_valentines_day/

Custom Installation Services, LLC – Home Theater, Audio and Video Services, Home Automation  in North Carolina and South Carolina

Posted in News, technology | Tagged , , , , , , , , , , , | Leave a comment


Custom Installation Services, LLC | P.O. Box 132 Matthews, NC 28106 | 704-400-8701 | dmiller@cis-nc.com
Visit Our Partners: DV Wise Custom Homes | CleanX Corp

 


 

 

 

 

Website Hosting and Website Design by McBryde Web Site Design
For technical issues e-mail webmaster@mcbryde.com