Home Entertainment & Automation Services in Matthews, NC.
Home Entertainment & Automation Services in Matthews, NC.
Home audio and Video Services in Matthews, NC.  TV installation, Surround Sound, Home Entertainment Systems
3D FAQs from Panasonic

CIS is Charlotte NC's Choice for 3d TV Answers!

CIS is Charlotte NC's Source for 3d TV Answers!

Panasonic clears up a few important technical details about 3D.

Several Electronic House contributors have visited the Panasonic Touch the Future Tour over the past couple of weeks, and we’ve each had a different take on what we saw.

Being the staff tech nerd, I latched onto a few important technical details pulled from the tour of Panasonic‘s 2010 model lineup. 

Why Active Shutter over Polarized glasses?

One bit of consumer confusion related to 3D comes from the glasses. When you go to see “Clash of the Titans” at a 3D theater or “Muppet Vision 3D” at Disney’s Hollywood Studios, you use cheap plastic glasses with polarized lenses. They’re light weight and cost less than $1 for each pair.

So why are major TV manufacturers gravitating towards heavier and more expensive active shutter glasses?

“Performance,” says Chad, the Panasonic rep on hand. “With an active shutter system, we can close off both eyes for a split second between each frame, which greatly reduces ghosting or crosstalk”.

Crosstalk is a phenomenon where an image intended for one eye is seen by the other, causing ghost images to appear. The Panasonic rep says active shutter glasses make it much easier to eliminate crosstalk compared to passive glasses where a polarized filter on the display has to switch directions for each eye.

Why plasma instead of LCD?

Another big point of consumer confusion rests in the battle between LCD and plasma. Each has its own benefits and drawbacks. Unfortunately, those differences are poorly communicated by manufacturers, especially manufacturers that produce both types. While Panasonic does produce both LCDs and plasmas, it draws a line in the sand at 42 inches; everything bigger is plasma and everything smaller is LCD. 

But why is plasma particularly conducive for 3D?

“It’s all about refresh rate”, says Chad. “With LCD technology, refresh rates are limited to 120Hz or 240Hz. With Plasma, we refresh at 600Hz and greatly improve motion perception, especially with 3D content”.

While Full HD 3D maintains full resolution for each eye, refresh rate is effectively cut in half. So a 120Hz LCD offers 60Hz to each eye; a 240Hz display offers 120Hz to each eye; and Panasonic’s 600Hz plasma effectively refreshes at 300Hz for each eye. 

What about 3D gaming on the big screen?

Panasonic has partnered with NVIDIA for the Touch the Future Tour. NVIDIA has been a player in 3D for some time with its 3D Vision add-on kit for 3D gaming.

“In the past, we’ve relied on 3D-capable monitors for 3D PC gaming through 3D Vision,” says Rambo Jacoby, marketing manager for NVIDIA. “Now, with our new 3DTV Play software, gamers can connect directly to 3D-capable TVs, without the need for the 3D Vision kit, using the display’s own 3D syncing and glasses.” 

I checked out the Avatar PC game in 3D on a 50-inch Panasonic V25 series plasma, and I was very impressed with the effect. That said, afterwards I saw an 11-year-old playing the game with no glasses enjoying it just as much. If kids are a major market focus for NVIDIA’s 3D gaming push, they may want to reflect on how to make the improvements clear to a less critical audience. 

The Panasonic Touch the Future Tour is a great event for mall-goers. If you haven’t visited yet, there are only a couple of dates and locations remaining.

This kind of event is exactly what manufacturers need to put their muscle behind to develop consumer interest in 3D and related technologies. Informed answers and hands on demos go a long way, and what I saw and heard was far more informative than any in-store demo I’ve seen to date.

by Stephen Hopkins

http://www.electronichouse.com/article/3d_faqs_from_panasonic_touch_the_future_tour/

Custom Installation Services, LLC – Charlotte and Asheville NC’s Source For Your Custom Home Electronics and Automation Needs!

Posted in 3d movies, 3D TV, Blu-ray, Flat Panel TV's, Gaming Systems, Home Theater, Media Rooms, Music and Movies, News | Tagged , , , , , , , , , , , , , , , , , | Leave a comment


9 Equipment Racks Fuel Tech-Heavy Home

CIS - NC's #1 Choice For Home Automation and Structured Wiring Services!

CIS - NC's #1 Choice For Home Automation and Structured Wiring Services!

This home is loaded with controls and A/V, including Wilson Audio speaker systems in the theater and the gym.

We’ve seen some large home technology installations, but this is definitely one of the most comprehensive—and top-notch for A/V considering there’s not one, but two rooms that contain high-end Wilson Audio speaker systems.

It’s not even a mega, mega 20,000-square-foot home, though it does amount to about half of that area when you combine the 8,000-square-foot main house and 2,500-square-foot guest house. But this home is tech-savvy from top to bottom, with nine Middle Atlantic equipment racks throughout the house loaded with brains and brawn.

For starters, there’s full Lutron lighting controls, six zones of HVAC control, Jandy controls for the pool, spa and front fountains, security system with pan-and-scan cameras, intelligent multiline phone system, and all of that plus the A/V throughout the house is under the easy operation of a Crestron home automation system.

There are 26 zones of audio and 24 zones of video, including a powerful Kaleidescape media server system that’s routed to all the main rooms, bedrooms and gym. The gym also features those wonderful Wilson Audio speakers to rev things up for a workout.

Where Wilson really rocks the house, though, is with its full surround system, driven by mighty Halcro amplifiers, in the dedicated media room. The video is just as sweet, too, with a Meridian projector beaming onto a motorized Stewart Filmscreen masking screen system.

There are even outdoor rock speakers and three outdoor subwoofers to cover the outside, where the family can also relax in a fully loaded BBQ area. Of course, Crestron touchpanels are everywhere in the home for truly simple command of all the systems, from all of that lighting down to the motorized TV cabinet doors in the master bedroom.

by Arlen Schweiger

http://www.electronichouse.com/article/9_equipment_racks_fuel_tech-heavy_home/

Custom Installation Services, LLC – Charlotte and Asheville NC’s Source For Your Custom Home Electronics and Automation Needs!

Posted in Audio Systems, Automation, Flat Panel TV's, HAI, Home Theater, lighting control, Media Rooms, technology | Tagged , , , , , , , , , , , , , , , , , , , | Leave a comment


SpeakerCraft Debuts Revolutionary A/V Distribution and Control System

C.I.S. - Your Source For SpeakerCraft Sales, Service and Installation in NC!

SpeakerCraft announced its ground-breaking new Nirv A/V distribution and control system.

SpeakerCraft, the world leader in custom installed loudspeakers and electronics, announced a ground-breaking new A/V distribution and control system. Called Nirv, the new system will feature several innovations that will obsolete many of the current offerings on the market.

“Being allowed to create the product from the ground up with no legacy system requirements gave us incredible design freedom,” says Jason Craze, SpeakerCraft’s Director of Electronic Development, who headed up the project. “We wanted the system to be powerful, flexible, simplistic to program and to operate with unparalleled audio and video quality. Our team has hit it out of the park in every area.”

The system has a modular architecture instead of a massive central hub design. This means the dealer will only need to buy the pieces necessary for the specific system he has designed and upgrading or expanding is as simple as adding what is needed to the network. On screen programming is so easy and intuitive it can be accomplished on-site by virtually anyone on the project team.
All media, data, control, and communication signals are distributed through a single CAT5 cable making system wiring both simple and cost efficient. Beyond standard A/V distribution, the system also integrates theatre surround sound, home automation, and page / intercom into one easy-to-manage package.

“It’s the first system of its kind that allows the user to own the experience instead of having the experience dictated by the equipment,” said Jeremy Burkhardt, SpeakerCraft’s President. “The system is almost transparent bringing content and control to the fingertips of the user through either touchpanel keypads or while navigating a GUI on the video screen. The remote single-handedly takes the complexity out of owning this type of system. You have to experience it to truly understand what a landmark product this is.”

That experience will first be available at the Nirv dome in the SpeakerCraft booth at the CEDIA Expo. Dealers will be able to see a full demonstration and talk to members of the design team. Product will begin shipping in the first quarter of 2010.

About SpeakerCraft
SpeakerCraft, established in 1976, devoted itself for more than a decade to the design and development of architectural loudspeakers and became known as the prime OEM for many well-known, in-wall speaker brands in the field. In marketing its own brand, now one of the widest lines of architectural speakers and electronics in the industry, SpeakerCraft brings with it years of experience and a dedication to dealer satisfaction.

by EH Staff

Custom Installation Services, LLC – Charlotte and Asheville NC’s Source For SpeakerCraft Sales, Service and Installation!

Posted in Audio Systems, Home Theater, Music and Movies, News, technology | Tagged , , , , , , , , , , , , | Leave a comment


Custom Installation Services, LLC | P.O. Box 132 Matthews, NC 28106 | 704-400-8701 | dmiller@cis-nc.com
Visit Our Partners: DV Wise Custom Homes | CleanX Corp

 


 

 

 

 

Website Hosting and Website Design by McBryde Web Site Design
For technical issues e-mail webmaster@mcbryde.com